LOCK/JIG - Lock Jig

£99.00

(Inc. 20% VAT)

~~£106.60~~

Saving Of

In stock, immediate despatch

–

Information

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks.

For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.
Deeper mortises can be achieved with a suitable size of auger bit.
Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
Steel plates & body.
An auger bit and drill is required to complete deep mortises.
The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.

Specifications

Door thickness min.:34 mm
Door thickness max.:58 mm
Template outer size:234.3 x 59.8 x1.5mm
Includes templates for locks having the following face-plate dimensions:
Metric (Imperial approx.) (D x OL):Template
22.2x156 mm (7/8\"x 6 1/8\"):1
22.5x152.5 mm (7/8\"x 6\"):2
25.4x121 mm (1\"x 4 3/4\"):3
25.4x127.5 mm (1\"x 5\"):4
25.4x133.5 mm (1\"x 5 1/4\"):5
25.4x145 mm (1\"x 5 3/4\"):6
25.4x153 mm (1\"x 6\"):7
25.4x156.5 mm (1\"x 6\"):8
25.4x165.5 mm (1\"x 6 1/2\"):9
25.4x177 mm (1\"x 7\"):10
25x57.5 mm (1\"x 2 1/4\"):11 UPPER
26x56.5 mm (1\"x 2 1/4\"):11 LOWER
25.6x162mm (1\"x 6 3/8\"):12
Mortise Lock Dimensions
Imperial (Metric) (D x OL):Template
16x72 mm* (5/8\" x 2 7/8\"):A
16x107 mm* (5/8\" x 4 1/4\"):B
19x78 mm* (3/4\" x 3 1/8\"):C
19x109 mm* (3/4\" x 4 1/4\"):D
24 mm x 24 mm (2 x circle)
*These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.

Includes

Customer Reviews (0)

Be the first to Write a Review for this item!

Model

LOCK_JIG

Bar Code

5027654521731

Part Number

LOCK_JIG

Brand

Trend